Format A Disc (Dvd Deck Only) - JVC DR-MH20S Instructions Manual

Format A Disc (DVD Deck Only)

Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unformatted disc or you want to
delete all recordings and data on the disc.
ATTENTION:
When a disc is formatted, all recordings and data are erased. It is
impossible to restore them.
Never turn off the unit or disconnect the AC power cord while
"NOW FORMATTING..." is displayed on the TV screen.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
Load a DVD-RAM/RW disc to format.
ENTER
CABLE/DBS
TV DVD
rtwe
SET UP
Format A DVD-RAM Disc
1
Press SET UP to access the Main Menu screen.
2
Press w e to select "HDD/DVD SET UP", then press t.
3
Press w e to select "DISC SET
UP", then press t.
4
Press rt w e to select
"FORMAT", then press ENTER.
Press w e to select "OK", then
press ENTER.
5
Press w e to select "OK", then
press ENTER.
Format A DVD-RW Disc
1
Perform steps 1 to 3 of "Format A DVD-RAM Disc" on the above
before continuing.
2
Press rt w e to select "FORMAT", then press ENTER. Press
w e to choose "VR MODE" or "VIDEO MODE", then press ENTER
when "DISC WILL BE FORMATTED" appears on the TV screen.
"VR MODE": To be chosen when you want to record, erase, or
edit data on the disc repeatedly.
"VIDEO MODE": To be chosen when you want to erase all the data
on the disc once played back to record new data,
or play back the disc on other DVD players.
3
Press w e to select "OK", then press ENTER.
NOTES:
It is impossible to format Version 1.0 DVD-RW discs in Video mode.
It is impossible to format DVD-R discs.
All the titles on a disc will be deleted once the disc is formatted even if
they are protected titles. (
SUBSIDIARY SETTINGS
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
HDD SET UP DVD SET UP DISC SET UP
FINALIZE CANC. FINALIZ.
Video
FORMAT
SET UP ENTER
SELECT WITH [ ] THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT SELECT
pg. 53)
71
EN
INITIAL SET UP