Recording Features - JVC DR-MH20S Instructions Manual

Recording Features

Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/DBS/DVD switch to DVD.
Press HDD so that the HDD lamp lights up on the unit.
TV AV/ VIDEO
HDD
DISPLAY
HDD
HDD Lamp
7
CABLE/DBS
TV DVD
CH+/-
BASIC OPERATIONS ON HDD DECK
Instant Timer Recording (ITR)
This easy method lets you record for from 30 minutes to 6 hours
(selectable in 30-min. increments), and shuts the unit off after
recording is finished.
1
Press 7 on the unit to start recording.
2
Press 7 again to engage the ITR mode.
On the front display panel, "0:30" appears.
3
If you want to record for more than 30 minutes, press 7 to
extend the time. Each press extends recording time by 30 minutes.
NOTES:
You can only perform ITR using the 7 button on the unit.
When the recording capacity becomes full during timer recording or
Instant Timer Recording, the unit is automatically shut off.
Watch Another Program While Recording On The Unit
While recording is going on, you can watch another program on the
TV by using the TV's tuner.
NOTE:
It is required that the remote control is set to be able to operate the TV
in advance. ( pg. 64)
1
Slide the TV/CABLE/DBS/DVD switch to TV.
2
Press CH +/– repeatedly to select the desired channel.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time ] Disc remaining time ] Clock ] (Back to
the beginning)
Second Audio Recording
This unit's built-in MTS decoder enables reception of Multichannel
TV Sound broadcast. To record a SAP program received, set "2ND
AUDIO RECORD" to "ON". (
NOTE:
When the channel is changed on the unit;
The "MONO" indicator appears on the screen for about 5 seconds if
the program is a monaural broadcast.
The "STEREO" indicator appears on the screen for about 5 seconds
if the program is a stereo broadcast.
Both "STEREO" and "SAP" indicators appear when a stereo program
is accompanied by SAP sound.
Both "MONO" and "SAP" indicators appear when the main audio on
the monaural broadcast is accompanied by SAP sound.
pg. 68)
41
EN