Index Search; Skip Search - JVC HR-XVS20EK Instructions Manual

26

Skip Search

During playback, press
unwanted sections.
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
To resume normal playback during a Skip Search,
press 4.
1 to 4 times to skip over
OPERATIONS ON S-VHS DECK (cont.)

Index Search

Your unit automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the unit
is in the Stop mode.
Activate Index Search.
Press or 6. "
2 2
TV screen and search begins in the corresponding
direction.
To access index codes 2 through 9, press 2 or 6
repeatedly until the correct index number is displayed.
Example:
To locate the beginning of B from the current position, press
2 twice.
To locate the beginning of D from the current position, press
6 once.
Current position
When the specified index code is located, playback begins
automatically.
Next Function Memory
The Next Function Memory "tells" the unit what to do after
rewinding. Before continuing, make sure the unit is in the Stop
mode.
a- For Automatic Start Of Playback
Press 3, then press 4 within 2 seconds.
b- For Automatic Power Off
Press 3, then press 1 within 2 seconds.
c- For Automatic Timer Standby
Press 3, then press # (TIMER) within 2 seconds.
d- For Automatic Cassette Ejection After Tape Rewind
Press 3, then press x within 2 seconds.
1" or " 1" is displayed on the
6
Index number