Index Search; Skip Search - JVC HR-XVC29SU Instructions Manual

28
EN
Slide to the
right.
3 PLAY
4 INDEX

Skip Search

During playback, press
unwanted sections.
Each press initiates a 30-second period of fast-motion
playback. Normal playback resumes automatically.
To resume normal playback during a Skip Search,
press 4 PLAY.
INDEX ¢
1 to 6 times to skip over
OPERATIONS ON VCR DECK (cont.)

Index Search

Your unit automatically marks
index codes at the beginning of
each recording. This function gives
you quick access to any one of 9
index codes in either direction.
NOTE:
Before starting, make sure the unit
is in the Stop mode.
Activate Index Search.
Press INDEX or INDEX 6. "INDEX –1" or "INDEX
2
1" is displayed on the TV screen and search begins in the
corresponding direction.
To access index codes 2 through 9, press 2 INDEX or
INDEX 6 repeatedly until the correct index number is
displayed.
Example:
To locate the beginning of B from the current position, press
INDEX twice.
2
To locate the beginning of D from the current position, press
INDEX 6 once.
Current position
When the specified index code is located, playback begins
automatically.
Instant ReView
Simply by pressing a single button, the unit power comes on,
rewinds, and begins playback of the last timer-recorded
program. If you have several programs recorded, you can easily
access any of them.
NOTE:
Before starting, make sure that the unit is off and that the Timer
mode is disengaged.
Activate Instant ReView.
Press . The unit power comes on and the unit
searches for the index code indicating the start of the last
timer-recorded program. Once it's found, playback
begins automatically.
To watch the first of the 3 programs, press
times. The unit searches and begins playback automatically.
You can access a program as far as 9 index codes away from
the current tape position.
Index number
three