Dubbing (From Dvd To S-Vhs) - JVC HR-XVS20EK Instructions Manual

64
Dubbing
(from DVD to S-VHS)
Turn on the TV and select the video channel (or AV
mode).
Slide the TV/S-VHS/DVD switch to the right.
EDITING (S-VHS DECK) (cont.)
You can dub selected scenes from the DVD disc to a cassette,
starting and stopping wherever you wish.
However, it is not possible to dub the copy-protected disc.
A
Load a cassette and place a disc.
For the S-VHS deck
Insert a cassette with the record safety tab intact.
For the DVD deck
A Press x on the DVD deck to open the disc tray.
B Place the disc in the disc tray.
C Press x on the DVD deck to close the disc tray.
B
Prepare the S-VHS deck for dubbing.
A Press S-VHS.
B Press
to select recording speed.
p
C Search for the point where you want to start dubbing
by pressing 4, 5 or 3 then press 8.
C
Prepare the DVD deck for dubbing.
A Press DVD.
B Search for the point where you want to start dubbing
by pressing 4, 5 or 3.
C Press 9 to pause playback a little before the start
point.
D Press and hold 7, then press 9.
"dub" blinks on the front display panel.
D
Start dubbing.
Press 4 to start playback.
E
End dubbing.
Press 8.
NOTES:
Set "ON SCREEN GUIDE" to "OFF" (
want to record the on-screen display for DVD discs during
dubbing.
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
The superimposed indication during the operation or dubbing
is not recorded.
pg. 77) if you do not