Getting Started Guide (v.1.2)
http://www.hotspotengine.com
This method works on many wireless routers but not all. If you are having problems
receiving an IP address after installation and are using a wireless router as an wireless
access point, you may need an actual wireless access point.
1.2.Preinstallation and Default Configuration
HotSpotEngine Installation process is simple and straightforward. The installer will set
default password for console login (user root), hotspot administrator panel login and also
the default address of all networks.
HotSpotEngine is configured with the following defaults:
Default console login (SSH port 22)
Username : root
Password : hengine
Default hotspot administrator panel (HTTP port 80, FTP port 21)
Address : http://192.168.120.1/admin
Username : admin
Password : hengine
Default WAN network address:
IP Address : 192.168.1.2
Subnet Mask : 255.255.255.0
Default Gateway and DNS
IP Address : 192.168.1.1
Primary DNS : 192.168.1.1
Secondary DNS : 192.168.2.1
Default LAN network address :
IP Address : 192.168.110.1
Subnet Mask : 255.255.255.0
Default Hotspot Network :
Hotspot Gateway :
IP Address : 192.168.120.1
Subnet Mask : 255.255.255.0
LAN Network (DHCP) :
IP Address Range : 192.168.120.2 – 192.168.120.254
4
Need help?
Do you have a question about the router and is the answer not in the manual?