Getting Started Guide (v.1.2)
Built-in Chillispot captive portal hotspot feature on DDWRT
At this point your wired/wireless client will get IPs from your ddwrt instead
Hotspotengine DHCP server. Only hotspotengine's http login page and radius feature will
be used by ddwrt. Configure your ddwrt flashed router as needed, after everything works
properly you can continue to configure ddwrt's built-in hotspot. For futher information
how to implement this please visit the following links:
http://www.dd-wrt.com/wiki/index.php/Chillispot
http://vuksan.com/linux/chillispot/dd-wrt-chillispot.html
In order to integrate built-in hotspot feature on ddwrt with HE, do the following steps:
1) Please configure your ddwrt built-in hotspot as mentioned on the links, to
integrate with hotspotengine please configure the following items:
• Primary Radius Server IP : Hotspotengine WAN IP
• Backup Radius Server IP : Hotspotengine WAN IP
• Redirect URL :
• Shared Key
• UAM Secret
h3n91neu4ms3chret you can see in login.php file at the following line
http://your.wan.ip.address/portal/login.php
: put your desired shared key
: if you are using default value from HE, the UAM secret is
16
http://www.hotspotengine.com
Need help?
Do you have a question about the router and is the answer not in the manual?