Mikrotik Routeros Integration - HotSpotEngine router Manual

Getting Started Guide (v.1.2)
$uamsecret = "h3n91neu4ms3chret";
You may change it, with your desired uam secret. Make sure you change both
(ddwrt hotspot menu and login.php file)
2) Open hotspotengine administrator panel, click settings tab and then click NAS
menu, fill the following form on NAS page as follow :
• NAS IP : your ddwrt IP Address (if you are using Internet based hotspot your
ddwrt IP address is gateway/masquerade router IP, commonly a public IP
address.
• Secret : your shared key as you put on ddwrt hotspot page
• Description : your desired description
3) Once you have configured them, login via SSH / console access to HE and type :
/etc/init.d/freeradius restart
4) After rebooting the router, ddwrt will use hotspotengine's access portal and radius
feature

3.6.Mikrotik RouterOS Integration

You need to setup and configure your Mikrotik Router OS by using Winbox. Winbox is
the graphical tool for configuring the Mikrotik Router OS. For further information how to
setup Mikrotik Built-in hotspot please consult the Mikrotik's User Guide. This guide
assumes you have configured Mikrotik Hotspot successfully. To integrate Mikrotik
hotspot with Hotspotengine, please do the following steps :
1. You need to add hotspotengine's radius server as authentication and accounting
server, In the hotspot profiles
profile and in RADIUS tab check
Interim Update
CHAP and allow
(IP -> HotSpot ->
Use RADIUS,
use : 00:05:00, in Login tab de-select Cookie, de-select
HTTP PAP
17
http://www.hotspotengine.com
Profiles) choose your hotspot
and check Accounting item, for
HTTP