Change Console Password; System Configuration; Dhcp Client Configuration; Hotspot Administrator Panel Login - HotSpotEngine router Manual

Getting Started Guide (v.1.2) http://www.hotspotengine.com

1.5.Change Console Password

Once logged to the system, please type passwd to change the console
password

2.System Configuration

2.1.DHCP Client Configuration

To remotely manage the system configuration, connect your client computer to LAN
interface and ensure the computer to have an IP assigned from the server (DHCP).
If client computer does not have an IP assigned, you may have to check the cable or the
server interface to which you are connected. Try to reconnect using another installed
interface.

2.2.HotSpot Administrator Panel Login

Once IP address acquired, remote web configuration can be accessed using a web
browser at (note: before you can access web configuration interface, it requires to
activate the software by uploading license file, for futher information please read activate
software license sub chapter on this document):
http://192.168.120.1/admin
Default login for the web configuration is admin with default password hengine. It is
strongly recommended to change the default password once you are logged in. You may
access web administrator panel login by accessing http://admin, (its valid when you have
configured DNS server correctly).
10