Duplicating A Video Tape - JVC 2A73501A User Manual

When you try to connect with a cable, make sure the power of both units have been turned off.
Connect the recording unit with the TV. Therefore you can just watch what the recording unit is recording.
1
Load a blank cassette tape with the erase prevention tab
intact into the recording DVD/VCR. Load the previously
recorded cassette tape into the playback VCR or a video
camera.
VCR
2
Use AUX or PR of the recording DVD/VCR to select the
"A1", "A2" or "A3" instead of the preset channel.
A1 = TV-RGB/Composite Scart Socket
A2 = VCR/DECODER Scart Socket
A3 = Front AV jacks
Connection with second Video recorder or Video camera
Playback unit
Recording unit
(not supply)
Press AUX on the
recording unit repeatedly
until A3 appears.
Duplicating a disc material onto a video tape
You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.
If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark "
on the screen for approx. 4 seconds. See page 42 for more information about the DVD playback.
Preparation:
• Load a cassette tape with the erase prevention tab
intact.
• Select the tape speed in the VCR mode. (see P.28)
• Load a disc you wish to duplicate.
1
Press DVD to select the DVD mode. (The DVD indi-
cator will light)
2
Press to start the disc playback.
OR
Playback on
camera
(not
supply)

Duplicating a Video Tape

3
2,
While holding press
4
Press PLAY-button and then PAUSE/STILL-button of
Playback unit. Now you can see the still picture of the
scene that you wish to duplicate.
5
Press 4 of both units simultaneously to start the Duplicat-
ing.
Note:
Before starting the duplicating process, select the proper
tape speed using
correct tape speed will be set automatically during
playback.
VCR/DECODER
SCART socket
Playback unit
HR-XV1EU
TV
SYSTEM SETUP
CLOCK SET
LANGUAGE/SPRACHE/LANGUE
AV2 [AV]
SELECT : /
ENTER : OK
EXIT : MENU
3
During disc playback, while holding 2, press
Note:
You can set the duplicating time using the ITR-function.
At step 3 above press 2 repeatedly until the desired
duplicating time appears on the screen.(P.30)
and then 4 of Recording unit.
. For a pre-recorded tape the
(not supply)
Recording unit
TV-Scart socket
(not supply)
• Select the "AV2" in menu
screen in the same way as the
step 1~2 on page 14.
Then press OK to select AV
mode.
" will appear
.
39