JVC 2A73501A User Manual page 34

Timer-Recording
5
Press OK to accept them.
To enter other programs,
repeat steps 2 through 4.
• To return to the normal
screen, press SET UP
MENU twice.
6
Press •. The clock symbol (
display and the DVD/VCR stands by for recording.
At the same time, VCR mode will change to DVD
mode automatically. You can use DVD even if the
VCR is in the Timer recording mode.
If you do not use the DVD, turn the power off.
• If the clock symbol (
spite of the pressing of •, the cassette may not
have been loaded yet. (see page 22)
• If the cassette is ejected in spite of the pressing
of •, the erase prevention tab of the cassette may
have been removed. (see page 22)
Note:
• In case of the timer recording from the scart socket,
proceed as follows: In step 4 press
edly until the "CH" line blinks. Then press AUX re-
peatedly until "AV1" or "AV2" or "AV3" appears.
• If the clock symbol (
ing ended, the TV program has not been completely
recorded because of an insufficient tape supply. Press
• to cancel the timer program or press EJECT to
remove the cassette tape.
• During timer recording standby mode, the VCR mode
cannot be selected. To use the VCR, press • at first,
then press VCR to change to VCR mode. After you
use the VCR, press • again to put the VCR into timer
recording standby mode.
Timer Recording Special case
Weekly (e.g. WKL-TU: each Tuesday) or daily (e.g.
MON-SAT: Monday to Saturday) Timer recording
Follow the procedure for timer recording on both pages
before. At picture 3 press
desired setting appears. Then press
or repeatedly, the indicator at DATE will change
as follows, in case today is Friday.
SUN-SAT 25 FRI ..... 24 SUN
MON-SAT MON-FRI
MON-SAT = ever yday from
Monday fo Saturday.
WKL-SAT = each Saturday
34
23 MON 13:00 14:30
------ --:-- --:--
------ --:-- --:--
------ --:-- --:--
------ --:-- --:--
------ --:--
--:--
------ --:-- --:--
------ --:--
--:--
SELECT : / OK
EXIT : MENU
) will appear on the
) blinks in the display in
or
) blinks when the timer record-
or repeatedly until the
. When you press
One month later
minus one day
WKL-FRI
WKL-THU.....WKL-SAT
TIMER REC SET
DATE WKL-WED
START
11:30
- - : - -
END
CH 2 ZDF
SPEED
SP
VPS/PDC ON
SELECT :
SET : / 0–9
EXIT : MENU
In case of Timer progarms-overlapping
LP
1V
-- -
-- -
• Do not overlap timer programs as portions of the con-
-- -
-
--
flicting programs will be lost. The first recording time
-- -
-- -
has priority over the next recording time as shown in
-- -
the diagram below.
Program 1
Program 2
Program 3
Recording
Control Settings
Note:
• The daily/weekly recording can be made continuously
until the recording is canceled or the tape reaches
the end.
• During timer recording the automatic rewinding
mechanism does not function.
Confirmation/Cancellation of the Timer
Recording
1
If the Timer has been activated, now press • to
deactivate the Timer. The clock symbol (
disappear. Then press VCR to change to VCR mode.
repeat-
2
Press PROG. twice. All the
8 Timer memories will
appear.
3
To
programmed setting:
Press
program you wish to correct,
then press OK to enter the
program input mode. Then
press
item you wish to correct.
Then correct the data with
or
To cancel Timer program:
Press
written line. Then press
CANCEL. This line is now
canceled.
4
Press SET UP MENU (or PROG.) repeatedly until
the TV-picture appears.
8 : 00 9 : 00
Deleted Parts
Non Recorded Portion Parts
Prog.1 Prog.2
------
------
------
------
------
SELECT :
CLEAR : CANCEL EXIT : MENU
correct the
TIMER REC SET
or to select the
SELECT :
SET
EXIT
or to select the
.
or to select the
10 : 00
11 : 00
Prog.3
) will
15 TUE 17:30 18:00 7V SP
23 MON 13:00 14:30 1V LP
25 WED 12:15 13:00 4 SP
-
--:-- --:-- --
--:-- -- -
--:--
--:-- --:-- -- -
--:-- --:-- -- -
--:-- --:-- -- -
/ OK
DATE 23 MO
START 13:00
END 14:30
CH 1 ARD
SPEED LP
VPS/PDC ON
: / 0–9
: MENU OK : OK
------ --:-- --:-- -- -
23 MON 13:00 14:30 1V LP
25 WED 12:15 13:00 4
SP
-
------ --:-- --:-- --
------ --:-- -- -
--:--
------ --:-- --:-- -- -
------ --:-- --:-- -- -
------ --:-- -- -
--:--
SELECT : / OK
EXIT : MENU