Repeat Playback - JVC 2A73501A User Manual

NOTE:
If the unit is turned off or starts record-
ing, the repeat mode is canceled.
Normal repeat playback
The entire video tape will be played until its end. The tape will
then automatically rewind to the beginning and the playback will
be repeated.
1
Press SET UP MENU. Press
EXTENSION. Then press OK.
2
Press or to select AUTO REPEAT.
3
Then press OK to select [ON] or
[OFF].
If [ON] is selected, the playback
will be repeated endlessly.
4
Press SET UP MENU until the menu screen is cleared.
5
To start the playback, press
The playback will be repeated endlessly.
To cancel normal repeat mode:
Follow the above step 3, then press OK to select the OFF
position. Press SET UP MENU to return to the TV.
Scene repeat playback
1
Press SET UP MENU.
Press or to select VCR EXTENSION. Then press OK.
2
Press or to select SCENE
REPEAT. Then press OK.
The playback starts automatically.
3
Press OK at the point you want to
start scene repeat play-back.
S–REPEAT will blink on the
screen.
4
Press OK once again at the point
you want to end scene repeat
playback.
SR–R will appear on the screen
and the tape will be rewinded
automatically to go back to the
starting point.
5
When the starting point was
found, the Scene repeat-play-
back will start automatically.
SR-PLAY will appear only once.
To stop Scene repeat playback:
Press 3.

Repeat Playback

or to select VCR
VCR EXTENSION
AUTO REPEAT
SCENE REPEAT
SELECT : /
ENTER : OK
EXIT : MENU
.
VCR EXTENSION
AUTO REPEAT
SCENE REPEAT
SELECT :
ENTER : OK
MENU
EXIT :
[ON]
[OFF]
S – REPEAT
SR – R
SR – PLAY
25