Duplicating A Video Tape; Duplicating A Disc Material Onto A Video Tape - JVC HR-XVC25U User Manual

Duplicating a video tape/Duplicating a disc material onto a video tape

Duplicating a video tape

If you connect the VCR to another VCR or camcorder, you can duplicate a previously recorded tape.
Make all connections before turning on the power.
1
Load a blank cassette tape with the erase preven-
tion tab intact into the recording VCR.
Load a previously recorded tape into the playback
VCR or CAMCORDER.
2
Press SP/EP to select the desired tape speed SP
or EP.
It is recommended that you set the speed to the
SP mode on the recording VCR for best results.
3
Press VCR CH + or – to select AUDIO/VIDEO input
position. "L" will appear in the
display.
Connection with second VCR
Playback VCR
To VIDEO OUT
AUDIO/VIDEO cable (supplied)
To VIDEO IN

Duplicating a disc material onto a video tape

You can record disc material in DVD, Video CD, Audio CD, etc. onto a video tape with this DVD/VCR only.
If the DVD disc has a Copy-guard feature, the duplicating is not possible. A symbol mark "
appear on the screen for approx. 4 seconds. See page 39 for more information about the DVD playback.
Preparation:
• Load a cassette tape with the erase prevention tab
intact.
•
Select the tape speed (SP or EP) in the VCR mode.
• Load a disc you wish to duplicate.
1
Press DVD to select the DVD mode. (The DVD
indicator will light.)
2
Press PLAY to start the disc playback.
36
To AUDIO (R) OUT
To AUDIO (L) OUT
Recording VCR
To AUDIO (R) IN
To AUDIO (L) IN
4
Press REC on the recording VCR or on the Remote.
While holding REC, press PLAY.
Then press PAUSE.
5
Press PLAY button on the playback VCR or
CAMCORDER, then press PAUSE button.
6
Press PAUSE on both the VCRs simultaneously to
begin the duplicating process.
Connection with Camcorder
Playback Camcorder
Recording VCR
To AUDIO (R) IN
To AUDIO (L) IN
AUDIO/VIDEO cable (not supplied)
To VIDEO IN
For duplicating a previously recorded tape from a
camcorder, follow the camcorder manufacturer's
instructions. A typical camcorder dubbing hookup
is shown above.
3
During disc playback, press REC on the VCR or
while holding REC, press PLAY on the Remote.
The duplicating will start.
NOTES:
• You can set the duplicating time using the ITR-function.
At step 3 above press REC repeatedly until the desired
duplicating time appears on the screen (see page 32).
• When the scanning mode is set to the progressive
mode, you cannot duplicate a disc material onto a video
tape. When REC is pressed, the PROGRESSIVE
indicator " " on the display window will flash and
"Please Set Off" will appear on the screen.
To AV Jack
" will