Audio Mixing - JVC 2A73501A User Manual

Audio Mixing

When playing audio dubbed video
tapes, press A.MONITOR to select the
sound you want to listen to. Press
A.MONITOR repeatedly until "MONO"
is displayed on the screen to listen only
to the dubbed sound. In case of the
other on-screen indications only the
original sound will be output. It is also
possible to listen to the dubbed and the
original sounds simultaneously. To
accomplish this, set "AUDIO MIX" to
"[ON]" (see right). During playback,
press A.MONITOR repeatedly until
"STEREO" is displayed on the screen.
Note:
To deactivate the AUDIO MIX function
follow the above procedure from step 1 to
3, select "[OFF]", and confirm the setting
by pressing SET UP MENU.
38
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
1
Press SET UP MENU.
Press or to select
VCR SETUP. Then press
OK.
2
Press or to select
AUDIO MIX.
Press / or OK to select
3
[ON].
If you select "[ON]", you can
listen to the dubbed and the
original sounds at the same
time.
4
Press SET UP MENU repeatedly until the TV picture
appears.
ATS (AUTO TUNING SYSTEM)
TIMER REC SET
VCR EXTENSION
VCR SETUP
CHANNEL SETUP
SYSTEM SETUP
SELECT :
ENTER : OK
EXIT : MENU
VCR SETUP
NICAM [AUTO]
AUDIO MIX [OFF]
SHARPNESS
SELECT : /
ENTER : OK
MENU
EXIT :
VCR SETUP
NICAM [AUTO]
AUDIO MIX [ON]
SHARPNESS
SELECT : /
ENTER : OK
MENU
EXIT :