JVC LYT1942-001A Instructions Manual page 7

Playing Videos Stored on the DVD
A
Connect this burner to the TV
To DC jack
Power lamp
• For details, refer to "Connecting to the TV" (P.12, 13).
B
Remove the USB cable
• The power lamp on the burner changes as follows.
Green Blinking orange
• When the USB cable is removed, the playback navigator appears automatically.
(About 40 seconds.)
• An unfinalized disc
Caution
cannot be played back
properly. Refer to the
instruction manual of the
Everio camera and
finalize the disc.
C
Use the selection keys on the remote control to select the video to
play back and press the ENTER button.
• When the power lamp blinks slowly in red due to a drop in the burner's interior
temperature, some functions will not work and there will be no image displayed on
the TV screen. Wait until the power lamp stops blinking in red before operating this
burner.
Connect to the TV
with an Audio/Video
cable.
Red Yellow
White
Remove the USB
cable
Orange
(Playback navigator screen on the TV)
Playback begins!
Red
White
Yellow
JUN.01.2008 09:51AM JUN.01.2008 11:45AM
AUG.01.2008 01:42PM AUG.01.2008 03:15PM
DIGEST PLAYBACK
TV
1/2
JUN.01.2008 05:09PM
AUG.01.2008 05:32PM
7