Air Flow Velocity And Direction Adjustment - Mitsubishi Electric Mr.SLIM MS24WN Operating Instructions Manual

AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT

■
AIR FLOW velocity and direction can be selected
as required.
•
Use the
•
If the operating sound of the air conditioner disturbs your
sleep, use the
■
CLOCK
AMPM
AMPM
SWING OPERATION
TOO TOO
ON/OFF
WARM COOL Use the swing operation for the air flow to reach all cor-
ners of the room.
Recommended HORIZONTAL
VANE range
FAN STOP
Use the
I FEEL COOL ally.
Use position
VANE START
COOL or DRY mode when adjust-
FAN DRY
ing to your requirements.
MODE WIDE VANE HR.
LONG MIN.
NOTE
■ In the cooling operation, when the air conditioner is op-
RESET CLOCK erated with setting the HORIZONTAL VANE to
set to horizontal to prevent condensed water from drop-
ping.
■ Adjust the vertical AIR FLOW direction using the remote
controller. If the HORIZONTAL VANE is moved manually,
it may cause trouble.
To change the AIR FLOW velocity, press
FAN
the button.
Each time the button is pressed, the fan speed is
(Low) →
changed in sequence: (Med.)
→ (High) →
(AUTO)
(High) notch to cool the room more.
(Low) notch.
To change the AIR FLOW blowing direc-
VANE
tion vertically, press the button.
Each time the button is pressed, the angle of the
HORIZONTAL VANE is changed in sequence: (1) →
(2) → (3) → (4) → (5) → (SWING) →
(AUTO)
1
COOL/
2
DRY
(AUTO) position usu-
3
(1) or (2) in the
4
5
(4) or
(5) for 1 hour, the AIR FLOW direction is automatically
Auto air flow direction control operation
■ When the AUTO mode is selected with the
VANE button, the position of the HORIZONTAL VANE is automatically
set to correspond to the operation mode for effective operation.
(1) COOL, DRY (2) FAN
The air is blown out horizontally.
■
To change the AIR FLOW blowing direction horizontally, press the
Each time the button is pressed, the angle of the VERTICAL VANE is changed in sequence:
→ → → → (SWING) →
SWING OPERATION
Use the swing operation for the air flow to reach all corners of the room.
Horizontal AIR FLOW blowing range
About 100°
NOTE
Adjust the horizontal AIR FLOW direction using the remote controller. If the VERTICAL VANE is moved manually,
it may cause trouble.
The air is blown out downwards.
WIDE VANE
button.
→
9