Air Flow Velocity And Direction Adjustment - Mitsubishi Electric MSD-CD09VD-H1 Operating Instructions Manual

AIR FLOW VELOCITY AND DIRECTION ADJUSTMENT

AIR FLOW velocity and
direction can be selected
as required.
HOW TO CHANGE THE AIR FLOW VELOCITY AND DIRECTION
To change the AIR FLOW velocity,press the
Each time the button is pressed,fan speed is changed in
sequence,from [Lo]
To cool the whole room,use the
●
If the sound of the air conditioner operation disturbs your sleep,use
●
the (Lo) mode.
To change the AIR FLOW blowing direction verically,press the
button.
Each time the button is pressed,angle of horizontal vane is
changed in sequence,from
(SWING)→ (AUTO)
RECOMMENDED HORIZONTAL VANE RANGE
Use in the (AUTO)position
usually.
Use ⑵ position
⑴or
(COOL,DRY) when adjusting as
required.
NOTE
In the cooling or drying operation,when the air conditioner is
operated with AIR FLOW blowing down ⑷or ⑸ for 1 hour,the AIR
FLOW direction is automatically set to level to prevent condensed
water from dropping.
Adjust the verical AIR FLOW direction using the remote controller.
If the horizontal vane are moved manually,it may cause trouble.
The direction of AIR FLOW at this place
⑷→ ⑸ just a sketch map and it does not indicate the actual
angle of the vane.
35
button.
[Med] [Hi] [AUTO].
(Hi) mode.
⑴→ ⑵→ ⑶→ ⑷→ ⑸→
COOL
DRY
⑴→ ⑵→ ⑶→