Konica Minolta bizhub C203 Operation Manual page 120

9
Function name
Print Type
Binding Position
Poster Mode
Overlap width line
Rotate _180
Image Shift
Chapters
Staple
Punch
Fold & Staple
Center Erase
Paper Arrangement
Note
"Staple" and "Saddle Stitch/Fold" functions are available only if the optional finisher is installed.
The "Punch" function is available only if the punch kit is installed on the optional finisher.
The "Center Erase" function is available only when optional finisher FS-609 is installed and the "Center
Staple & Fold" function is specified.
9-14
Option
1-Side, 2-Sided, Booklet
Left stitch, right stitch, top stitch
2 e 2, 3 e 3, 4 e 4
ON/OFF
ON/OFF
ON/OFF
Front Side/Back Side
ON/OFF
Page Number
ON/OFF
ON/OFF
Off, Center Staple & Fold, Half-Fold
ON/OFF
Finishing Priority, productivity prior-
ity
Print function of Mac OS X
Description
Specifies duplex printing and booklet printing.
Specifies the binding position.
Prints one sheet of an original divided on multiple pag-
es. "Poster Mode Overlap" allows you to specify the
presence of the border frame.
Specifies the presence of a poster mode overlap. This
setting can be specified when the "Poster Mode" set-
ting is other than "OFF".
Rotates 180° to print.
Prints by shifting the entire print image. The screen is
displayed when the setting is enabled and allows you
to set the detail of the shift length.
Specifies the shift direction and values. For 2-sided
printing, clearing the "Same Value for Front and Back
Sides" check box allows you to set different values
between the front and back sides.
Specifies the page to be printed on the front side. The
screen is displayed when the setting is enabled and al-
lows you to set the page.
You can specify it when the print type is "2-sided" or
"Booklet".
Specifies the page to be printed on the front side
when "Chapters" is selected.
Specifies stapling.
From the drop-down list, specify the number of sta-
ples and the stapling position.
Specifies hole punching.
From the drop-down list, specify the number of
punches and the position.
Specifies to half fold and center staple.
When Center Staple & Fold is specified, select this op-
tion not to print on the center fold line.
Specifies the method for adjusting the binding posi-
tion for 2-sided print. The biding position is adjusted
after receiving all data for finishing priority. When Pro-
ductivity Priority is specified, the machine processes
data reception and printing concurrently.
bizhub C353/C253/C203 (FE2)