Position Of Inner Rotary Hook Bracket - Brother PE-180D Service Manual

9.

POSITION OF INNER ROTARY HOOK BRACKET

STANDARD
When the inner rotary hook bracket and the rotary hook meet, the spring of the inner rotary hook bracket and the
inner rotary hook should overlap each other by 1.9 - 2.1 mm.
ADJUSTMENT
1. Loosen the screw of the inner rotary hook bracket.
2. Adjust the forward-backward and sideways positions of the inner rotary hook bracket.
NOTE : Surface A of the inner rotary hook should be parallel to the front of the embroidery machine (parallel
to the upper shaft).
3. Tighten the screw of the inner rotary hook bracket.
- 22 -