Position Of Sensor Shutter - Brother PE-180D Service Manual

3.

POSITION OF SENSOR SHUTTER

STANDARD
When the needle bar is at its highest position, the rotary shutter should be positioned so that the screw is facing
toward the front of the machine.
ADJUSTMENT
1. Turn the hand wheel to raise the needle bar to its highest position.
2. Loosen the screw of the rotary shutter.
3. Turn the screw of the rotary shutter toward the front.
4. Tighten the screw of the rotary shutter.
NOTE : Make sure the side of the rotary shutter does not contact the photointerrupter. Turn the hand wheel
by hand to check.
- 16 -