Bauhn AS-PVR1000R Instruction Manual page 15

Basic Operations (Cont.)
DTV Manual Search
Press MENU to open the
1.
Main Menu.
2. Press the /
select Installation, then press
to enter the menu on the
right.
3. Press the /
to select DTV Manual Search,
then press OK.
4. Press the /
to select a frequency. After a
few moments the Strength &
Quality bars will indicate if there is any signal on the selected frequency.
Press OK to add the selected frequency to the list you wish to scan.
5.
A '+' symbol will appear in the column Selected.
6. Press to start the scan.
The unit will now search the selected frequencies for and add DTV channels.
When finished, the first channel will be displayed.
NOTE: Any timer recordings or reminders you have set will be cleared when a
channel search is performed.
Changing Channels
There are five options for selecting a channel to view:
• Press CH+ / CH- on the remote control or front of the AS-PVR1000R.
• Press the / arrow keys on the remote control.
• Press OK to display channel list, then use the
channel and press OK to view it.
• Use the numbered buttons to directly enter the
channel number you wish to view.
• Press the EPG button to open the Program Guide and
select a channel from the list.
NOTE: If recording two programs, you will only be
able to select and view channels from the
same broadcaster as the two programs you are
recording.
After Sales Support
Telephone:
Email: info@tempoaustralia.com.au
arrow keys to
arrow keys
arrow keys
1300 886 649
/ arrow keys to choose a
15