Standard Signal Mode Table - Samsung U32D970 User Manual

- This product can be set to only one
resolution for each screen size to obtain
the optimum picture quality due to the
nature of the panel. Using a resolution
other than the specified resolution may
degrade the picture quality. To avoid
this, it is recommended that you select
the optimum resolution specified for
your product.

Standard Signal Mode Table

Model Name
Synchronization Horizontal Frequency
Vertical Frequency
Resolution Optimum resolution
Maximum resolution
If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. If the signal transmitted from the
PC does not belong to the standard signal modes, the screen may be blank even though the power LED turns on. In such a case, change the settings according to the
following table by referring to the graphics card user manual.
Resolution Horizontal Frequency
(kHz)
IBM, 640 x 350 31.469
VESA, 640 x 480
31.469
IBM, 720 x 400
31.469
MAC, 640 x 480
35.000
MAC, 832 x 624 49.726
MAC, 1152 x 870 68.681
VESA, 640 x 480 37.861
VESA, 640 x 480 37.500
VESA, 800 x 600 35.156
U32D970
30 ~ 81 kHz
56 ~ 75 Hz
DisplayPort1 / DisplayPort2: 3840 x 2160 @ 60 Hz
HDMI / DVI: 3840 x 2160 @ 30 Hz
DisplayPort1 / DisplayPort2: 3840 x 2160 @ 60 Hz
HDMI / DVI: 3840 x 2160 @ 30 Hz
Vertical Frequency (Hz) Pixel Clock (MHz)
70.086 25.175
59.940 25.175
70.087 28.322
66.667 30.240
74.551 57.284
75.062 100.000
72.809 31.500
75.000 31.500
56.250 36.000
Sync Polarity (H/V)
+/-
-/-
-/+
-/-
-/-
-/-
-/-
-/-
+/+
91