Table of Contents
Advertisement
PBP Mode
(available in PBP
mode(Size
))
Image Size
Wide
Wide
Wide
Wide
Apply
Cancel
(available in PBP
mode(Size
))
Image Size
Wide
Wide
- The displayed image may differ depending on the model.
Set the
Image Size
1
Press any button on the front of the product to display the Function Key Guide. Next, press
corresponding menu screen.
2
Press
3
Press
4
Press
In
PC
mode
• Auto: Display the picture according to the aspect ratio of the each screen input source.
• Wide: Display the picture in full screen regardless of the aspect ratio of the each screen input source.
In
AV
mode
• 4:3: Display the picture of the sub-screen with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
• 16:9: Display the picture of the sub-screen with an aspect ratio of 16:9.
Screen
•
― The function may not be supported depending on the ports provided with the product.
― Changing the screen size is available when the following conditions are satisfied.
- A digital output device is connected using the DVI/HDMI/DP cable.
- The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can support all of
- This can only be set when the external input is connected through DVI/HDMI/DP and
Apply
5
Use
Cancel
6
Use
7
The selected option will be applied.
for each of the divided screens.
Screen
to move to
and press
to move to
PIP/PBP
and press
Image Size
to move to
and press
Fit: Display the picture of the sub-screen with the original aspect ratio without cutting anything off.
these signals.).
and
/
to specify the
Image Size
and
/
to move the focus to
on the product.
on the product.
on the product.
PC/AV Mode
for each of the divided screens.
Apply
and press
.
to display the
is set to AV.
65
Advertisement
Table of Contents
