Table of Contents
Advertisement
Utilizing the Product as a USB HUB
Using the product as a hub, connect and use various source devices with the product at the same time.
A PC cannot connect to multiple source devices at the same time as it has a limited number of input/output ports available. The HUB feature on the product will improve
your work efficiency by allowing you to connect multiple source devices to the USB ports on the product at the same time without connecting them to a PC.
If multiple source devices are connected to the PC, the many cables around the PC may look messy. Connecting the devices directly to the product will resolve such
inconvenience.
Connect a mobile device such as an MP3 player or smartphone to the product when connected to a PC. This allows you to control the device from the PC or charge the
device battery.
― To detect and start a source device faster, connect the device to the USB 3.0 port on the product.
― An external mass-storage HDD requires an external power supply. Be sure to connect it to a power source.
― High-speed charging is possible using the
and
ports only. These ports charge devices faster than typical USB ports. The speed depends on the connected
devices.
― Battery charging is possible in power-saving mode. However, it is not possible when the product is powered off.
― To charge a battery, make sure that the USB upstream port on the product is connected to a PC via a USB cable.
― Battery charging is not possible if the power cable is disconnected from the power socket.
― Mobile devices should be purchased separately.
39
Advertisement
Table of Contents
