Table of Contents
Advertisement
PIP/PBP
The PIP (Picture in Picture) function separates the screen into two parts. One
source device is displayed on the main screen at the same time the another
source device is displayed in inset windows.
Running the PBP (Picture by Picture: split screen) feature splits the screen into two
or four screens. Screens from different external devices are displayed on each of
the divided screens at the same time.
Screen
Image Size
H-Position
V-Position
PIP/PBP
- The displayed image may differ depending on the model.
― The
Configure the options
for the PIP/PBP feature.
Screen Fit
3
3
▶
― To maximize the picture quality, a graphics card that supports the following resolutions is recommended:
― When the
PIP/PBP
function may not be available depending on the specifications of the graphics card used.
If the screen is blank in
PIP/PBP
mode when the optimum resolution is selected, go to Control Panel
Screen Resolution and click Detect on the PC. (Instructions are based on Windows 7.)
If the screen is blank when the resolution is set to the optimal resolution, change the resolution as follows:
― If split into two screens: 1920 x 2160 (if rotated: 2160 x 1920)
― If split into four screens: 1920 x 1080 (if rotated: 2160 x 960)
― If split into two screens: 1920 x 2160 (if rotated: 2160 x 1920)
― If split into four screens: 1920 x 1080 (if rotated: 2160 x 960)
PIP/PBP
function is enabled, the resolution may not automatically switch to the optimum resolution due to a
compatibility issue between the graphics card and the Windows operating system.
PIP/PBP Mode
Off
Set
to
or manually change the resolution to the optimum resolution using the Windows interface.
Display
55
Advertisement
Table of Contents
