Advertisement
SETUP COMPLETE
Congratulations!
Your TalkSwitch system should now be ready to accept incoming calls.
TIP: Put a TalkSwitch Reference Card next to each extension phone to help
employees become familiar with the TalkSwitch features.
Configuring TalkSwitch units remotely
Once installation is complete, you can configure your TalkSwitch units via a TCP/
IP connection between TalkSwitch and a remote PC running the TalkSwitch
configuration software. For details, refer to the TalkSwitch User Guide.
Note: The TalkSwitch 24-CA model does not have a network connection option
and cannot be configured remotely.
Note: If TalkSwitch is installed behind a router/firewall, you will need to map
port 9393 to TalkSwitch to enable remote configuration. For details on port
mapping, visit http://www.portforward.com/routers.htm.
What next
•
To add remote extensions (e.g. cell phone or remote location) or take
advantage of other TalkSwitch features, refer to the TalkSwitch User Guide.
•
To configure your system to use VoIP, refer to the TalkSwitch VoIP Network
Configuration Guide.
We trust that your TalkSwitch phone system will provide exceptional
features, performance and value to your business. Should you have any further
questions, please contact your authorized TalkSwitch reseller. If you purchased
directly from TalkSwitch, visit www.talkswitch.com/support or
http://global.talkswitch.com, or call 1.866.393.9960 (North America).
We welcome your feedback, comments and suggestions. Please e-mail us at
info@talkswitch.com or write us at TalkSwitch, 1545 Carling Avenue,
Suite 510, Ottawa, ON Canada K1Z 8P9.
Thank you for choosing TalkSwitch.
W W W . T A L K S W I T C H . C O M
1 5
Advertisement
