JVC XV-D701BK Instructions Manual page 61

Setting and adjustment
In Test tone mode, you hear pink
noise, which includes all frequencies
in the audible range, from the
speakers. This is not a malfunction.
The test tone is not output from the
SUBWOOFER output.
60
5 Test tone (available only while setting LEVEL or DELAY)
You can check the level or delay setting by
monitoring the test tone.
1 Select [TEST TONE] using
.
ENTER
The color of "TEST TONE" changes.
2 Select the desired speaker(s) using
• F.SP: front speakers
• C.SP: center speaker
• R.SP: rear speakers
After selecting the Test tone, if you do not move the cursor, the test tone is
output from each speaker one by one.
In Test tone mode, if you move
continues to output from the rear speakers as long as
than "F.SP" and "C.SP". Similarily, if you move
the test tone continues to output from the front speakers as long as
position other than "C.SP" and "R.SP".
3 Set the level or delay using
NOTES
¶
To exit the test tone mode
Move to [TEST TONE] in the on-screen display and press
[TEST TONE] returns to its original color.
PREFERENCE1
, then press
PRESS
.
down from "R.SP" position, the test tone
up from "F.SP" position,
again, if necessary.
PREFERENCE2
SPK.SETTING
EXPERT
LEVEL
DELAY
F. SP 0db
C. SP 0db
R. SP 0db
S.WOOFER 0db
KEY
TEST TONE
is any position other
is any
until
ENTER