Speaker Setting - JVC XV-D701BK Instructions Manual

Speaker setting

You can make speaker setting according to your system. Normally, simply select
"5.1 CHANNEL" or "2 CHANNEL". However, if you select "EXPERT", you can set
various settings to match your speakers.
SPEAKER CHANNELS
You can select the speaker channels
according to the speaker system connected
to
• 2 CHANNEL
When you connect to a 2-channel
amplifier, or use 2 speakers.
• 5.1 CHANNEL
When you connect to a 5.1-channel amplifier and use the front, rear , center and
sub-woofer speakers.
• EXPERT
When you want to set the various settings to match your speakers. The
following five setting items are available.
NOTES
¶
When selecting 5.1 CHANNEL or EXPERT, set DOWN MIX to OFF (see page
57).
¶
Dolby Digital LFE (Low Frequency Effect) signals are always fed from the
SUBWOOFER output on the rear panel of the unit regardless of speaker
setting.
¶
When playing back digital audio output signals of the unit using an external
decoder, speaker setting above is invalid. Make setting of the external
decoder properly.
Setting and adjustment
PREFERENCE1 PREFERENCE2
SPK.SETTING
5.1 CHANNEL
LEVEL
DELAY
F. SP Large
C. SP Small
R. SP Small
BASS S.woofer
PRESS KEY
TEST TONE
English
Français
57