Stopping Playback Temporarily - JVC SP-PWV70 Instructions Manual

2 Insert a disc into the disc slot with the label side facing the front or up as shown below.
Insert a disc halfway, then it is pulled into the center unit automatically.
• When the center unit is placed vertically
Label side
After the system reads the disc information, playback starts.
To remove a disc
Press 0 again. The disc comes out from the disc slot. "EJECT" appears on the display window and on the TV screen.
NOTE: When the center unit is placed vertically
When AM, FM, AUX, or AUX DIGITAL is selected as the source, if the indication as illustrated below appears on the
display window, a disc is already inserted. Press 0 to remove the disc before inserting another disc.
Example: When "AUX" is selected.
NOTES:
• With Video CDs/SVCDs with PBC function (see page 7), or some DVD Video discs, the menu display may appear on the TV screen after
starting playback. In such a case, select an item to be played back from the menu. See page 39.
• When the system is in standby mode, pressing 0 also turns on the system.
• The stored position for the resume playback is canceled when removing a disc.
• You can check the playback information on the display window and the TV screen (see page 37).
Playback information on the display window
While loading and playing a disc, the current title/chapter/track numbers, time, and status information appear on the display
window.
Playing back a DVD:
(EX. When a DVD encoded with
Dolby Digital 5.1ch is played)
Playing back a VCD/SVCD/
Audio CD:
(EX. When a VCD is played)
NOTES:
• You can change the time information mode. See page 38.
• You can also check the playback information on the TV screen. See page 37.
• The current disc type information appears as follows:
– "VCD": shows a VCD or SVCD is loaded.
– "CD": shows an Audio CD is loaded.
• When a Video CD or SVCD with PBC function is played, the time information does not appear, but "PBC" appears.

Stopping playback temporarily

Press PAUSE.
From the remote control:
Press 8.
On the center unit:
To return to normal playback,
Press PLAY (or 3 on the center unit).
• When the center unit is placed horizontally
Disc slot
L R
Signal indicators (see page 34.)
L C R
LFE
LS RS
DIGITAL SURROUND
Current surround mode and digital signal format (see page 33.)
Current disc type
L R
Label side
When the center unit is placed horizontally, the moving panel
closes after inserting the disc.
This indication shows
that a disc is inserted.
Current chapter number
Time information
Current track number
Time information
Disc slot
VIDEO SUPER AUDIO
DVD
CD VCD CD
28