Table of Contents
Advertisement
EJECT
1.
The EJECT buttons is used to eject the CD or DVD that is in the system. If
there is no disc in the system, the button will not react.
2.
When the disc is ejected and not removed, it will automatically be pulled in
to avoid the damage to the disc.
MODE
1. Tap the Mode button to go to the Main Menu.
2. When in the Main Menu, use the touch screen to select the desired
functionality.
3. You can also access the Main Menu from any screen by tapping the
function icon in the top left of the current screen.
NOTE: When viewing video in full screen please touch the screen once to bring up the screen
header which will display the function icon. Tap the icon to return to the Main Menu.
NAVI
1.
Press the NAVI button to go to the navigation system.
2.
While viewing your navigation press the NAV button to return to your
active source. If you are running a navigational route, audio voice prompts
will continue to be heard over your speakers according to the Navigation
audio settings you have selected in the settings menu (see page 11).
3.
To hear only your navigation audio voice prompts press and hold the
NAVI button for 2 seconds. This will mute your current audio source until
you leave the navigation screen.
CAM
Press to switch to Camera mode manually
1.
FAV
1.
Your Infotainment Center is equipped with a favorite source hotkey. Press
the button to directly access your favorite audio source.
XiteSolutions North America Inc.
.
2. Main Unit Display
Rotary button Volume/Power
1.
Turn on the ignition to power up the Infotainment Center. When the
Infotainment Center is started up, it will immediately go to the last mode
(memory on playback) before it was turned off.
2.
In order to put the unit in standby mode, please press the Rotary Power
button (PWR) for more than 2 seconds. During standby, the display will
show your vehicle graphic or be off. Your preference can be set in the
Settings menu (See page 10). Press the Power button again to start up
again.
3.
Turn the Rotary button to adjust the volume to the desired level.
4.
Quickly pressing the Power button will mute the audio on your system.
Press again or a volume button to resume audio.
5.
In order to turn the unit off completely remove ignition key and/or ensure
any auxiliary battery power to the system is turned off.
8
Advertisement
Table of Contents
