Incoming Calls; Outgoing Calls; Bluetooth Operation - Sirius XM RAdio XSG2NA-X2S Owner's Manual

Infotainment center

Table of Contents

XiteSolutions North America Inc.

8.3 Incoming Calls

While the mobile phone is connected, incoming calls will be handled by the

Infotainment Center. When an incoming call is present the LCD display will switch to

Bluetooth mode and show the phone number (when available) from the person

calling. Under the phone number, the buttons Accept and Reject are present.

Tap to accept the call. The Infotainment Center will accept the call and

give the call audio over the normal car speakers.

Tap to reject the call. The Infotainment Center will close the connection

and return to the previous operation. (Some phones may not support the

reject mode.)

When a call is ended, the Infotainment Center will switch back to its last mode. This

will be done automatically after 5 seconds or can be done manually by tapping the

NOW button. If CANCEL is pressed, the Bluetooth mode will remain active.

Direct Dialing

To place an outgoing call, the screen will show a numeric pad where the phone

number can be entered manually.

Tap the Backspace button if you have made a dialing error

Tap the Redial button to redial the last number called with the mobile

phone.

Voice Dialing

When the mobile phone also supports voice dialing, a Voice Dial button

will also be available. The Infotainment Center will display Voice Dial on the screen

and await a voice command when tapped.

Note: The Voice Dial functionality is highly dependent on the connected mobile phone. Please read the

mobile phone's user manual for instructions.

Table of Contents

Xsg2na-x2