Connecting With An Audio Equipment With Digital Input - JVC LET0091-001A Instructions Manual

Before Using for the First Time
12

7 Connecting with an audio equipment with digital input

By connecting the player's DIGITAL OUT (coaxial or optical) with the digital input
of an amplifier, DAT or MD using a digital cable, the digital stereo audio signal in
a disc is directly transferred.
ATTENUATOR 2CH FRONT REAR
RIGHT LEFT RIGHT LEFT RIGHT LEFT
OFF ON
AUDIO OUT
VIDEO OUT
VIDEO S-VIDEO
Optical
Coaxial
digital
or
cable
cable
Note: • Before actual usage, set "DIGITAL AUDIO OUTPUT" in the "PREFERENCE"
display to "PCM ONLY," otherwise, playing back a Dolby Digital encoded
DVD may generate noise and, in the worse case, damage your speakers.
See "Preference via "PREFERENCE" on-screen display" on pages 53.
• Set "DOWN MIX" setting in the DVD on-screen display to "L0/R0" or "Lt/
Rt". (See "Down Mix" on page 33.)
CENTER SUBWOOFER
NORMAL GAIN PLUS
DIGITAL OUT AV COMPU LINK
PCM/DOLBY DIGITAL
COAXIAL OPTICAL
To digital input
MD Player
XV-D2000BK
1