Notes - INTERNATIONAL CARBONIC TUACA Installation And Service Manual

TUACA leaking 1.
from nozzle
after actuation
No TUACA 1.
being
dispensed 2.
3.
4.
5.
6.
7.
No TUACA 1.
being
dispensed 2.
3.
4.
Frequently Called Numbers:
__________________________________
__________________________________
__________________________________
__________________________________
__________________________________
__________________________________
_____________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________________________________________________________________________________
____________
Peristaltic pump tubing has lost
its elasticity.
No electrical power.
Pinched or crimped lines.
Broken liquor switch.
Bad transformer.
Disconnected wire.
Defective PPM assy.
Worn or defective neoprene
tubing in PPM assy.
TUACA reservoir empty.
PPM Assy defective.
Defective neoprene tubing.
Defective transformer.
NOTE SECTION
1. a. Replace PPM tubing.
1. Plug power cord into electrical
box. Check line voltage.
2. Repair defective line.
3. Replace defective switch.
4. Replace defective transformer.
5. Attach disconnected wire.
6. Replace PPM assy.
7. Replace defective tubing.
1. Replenish TUACA supply.
Replace PPM Assy.
2. Replace neoprene tubing.
3. Replace transformer.
4.
____________________________
____________________________
____________________________
____________________________
____________________________
____________________________
__________________________________
17