INTERNATIONAL CARBONIC TUACA Installation And Service Manual page 13

11. Your unit is equipped with an on/off
switch. This switch is supplied to shut
off the refrigeration during time of flush-
ing. If refrigeration does not initially
come on remove front panel and check
switch to make sure it is in the on
position.
Note: to increase your customers enjoyment cool your shot glasses before serv
7. Turn TUACA bottle upside down
and insert into bottle reserve. Adjust
support assembly to stablize bottle.
8. Plug unit into a 110 volt outlet. The
refrigeration system will automatically
start. If refrigeration does not come on
go to step #12.
9. Activate the "PUSH HERE" switch
until the TUACA is dispensed. The level
of the TUACA in the bottles will drop as
the cooling coils are filled. Dispense 6-8
ounces in order to flush unit.
DO NOT REUSE!
10. In approximately 15 minutes the unit
will dispense ice-cold TUACA shots.
For Service and/or Installation Assistance
Please Call Sentry BevCon
800 661-3003
10