Maytag PY-2 Use & Care Manual page 5

Time Dry/Air Fluff
This cycle can be used to regulate the drying time. Use
with Air Fluff, Delicate, Medium or Regular temperature
settings. For timed drying, turn the control dial
clockwise until the pointer points to the proper time
setting in the Time Dry/Air Fluff cycle.
Note
• Using the Air Fluff temperature setting will require
a longer drying time.
Special Options
Damp Dry is located on the Time Dry/Air Fluff section
of the dial. It is designed to partially dry items and can
be used with any temperature selection. Damp Dry
will provide 20 minutes of tumbling time, followed by
five minutes of cool-down tumbling.
Wrinkle Release will release wrinkles from items that
are clean and dry but only slightly wrinkled, such as
from a crowded closet or suitcase, or from sitting in
the dryer too long after the cycle has ended. Wrinkle
Release provides 10 minutes of tumbling followed by
five minutes of cool-down tumbling and can be used
with any temperature selection.
Cycles and options may vary by model.
STEP
Push the Control Dial in to
Start
Push the control dial in to start the dryer. The dryer
door must be closed for the dryer to start.
Note
• The dial can be turned in either direction to select
a cycle. Once started, the dial will not advance at
a specific rate during the IntelliDry cycles. At first
the dial may not advance at all. Toward the end of
the cycle (when the load begins to dry), the dial
will advance at a more regular rate and much
more quickly. This is normal operation.
4
4