Operating Tips; Clean The Lint Filter; Load The Dryer Properly; Control Panel - Maytag PY-2 Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

Operating Tips

Clean the Lint Filter

• After each load.
• To shorten drying time.
• To operate more energy efficiently.
Note
• Do not operate the dryer without the lint filter in
place.
Care & Cleaning

Control Panel

Clean with a soft, damp cloth. Do not use abrasive
substances.
Tumbler
Remove any stains (such as crayon, ink pen or fabric
dye) with soap and water. Then tumble clean old
towels or rags to remove any excess stain.
Cabinet
Wipe off any marks with soap and water. Use an
appliance wax once a year if desired.

Dryer Exhaust System

Inspect and clean once a year to maintain optimum
performance. The outside exhaust hood should be
cleaned more frequently to ensure proper operation.
(Refer to the Installation Instructions for more
information.)
5

Load the Dryer Properly

• Place only one washload in the dryer at a time.
• Mixed loads of heavy and lightweight clothes will dry
differently. Lightweight clothes will dry, while heavy
clothes may be damp.
• Add one or more similar items to the dryer when only
one or two articles need drying. This improves the
tumbling action and drying efficiency.
• Overloading restricts tumbling action, resulting in
uneven drying as well as excessive wrinkling of some
fabrics.

Replacing the Drum Light

1. Unplug or disconnect the dryer from the power
supply.
2. Lift top of dryer by inserting a putty knife under
top, 4" in from each side.
3. Rotate bulb holder to vertical position before
removing bulb.
4. Push bulb down and rotate counterclockwise to
remove.
5. Replace with a 25 watt, 115/125 volt twist lock
utility light Part No. 53-0570 or equivalent. Place
bulb in socket, push down and rotate clockwise.
6. Rotate bulb holder to horizontal position.
7. Place top of dryer back in original position. Make
sure metal tabs hold top in place.
8. Reconnect dryer to power supply.
6

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

Performa py-3Performa hy-2

Table of Contents