Using The Controls - Maytag PY-2 Use & Care Manual

Using the Controls

STEP 1
Select Temperature
In order to select the correct temperature, turn the
temperature control to one of four choices; Regular,
Medium, Delicate or Air Fluff.
DRYER TEMPS
Regular Sturdy cottons or labels marked
Tumble Dry.
Medium For wrinkle free/permanent press
synthetics, lightweight cottons
labeled Tumble Dry Medium.
Delicate For heat sensitive items labeled
Tumble Dry Low or Tumble Dry
Medium.
Air Fluff Items which need freshening.
Load tumbles with room
temperature air.
STEP 2
Select Options
Extended Tumble
Extended Tumble is provided to minimize wrinkles in
the IntelliDry Wrinkle Free Fabrics cycle. This feature
provides an extra 60 minutes of unheated tumble
action at the end of the cycle. Clothes can be removed
any time during this portion of the cycle. The additional
60 minutes of unheated tumbling can be cancelled by
turning the selector knob to OFF.
End of Cycle Chime
When the cycle is complete, a chime will sound.
Remove load immediately to reduce wrinkling.
3
LOAD TYPE
STEP 3
Select Cycle
To select a cycle, rotate the control dial to the desired
setting. When using an IntelliDry cycle, the control dial
should point between More Dry and Less Dry for most
loads.
Loads of larger or bulkier size may require the More
Dry setting to completely dry the load. The Less Dry
setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of the
cycle.
IntelliDry Regular
The IntelliDry Regular cycle is designed to dry most
cottons and linens. At the end of the cycle, the load is
cooled for approximately 10 minutes to reduce
wrinkling.
IntelliDry Wrinkle Free Fabrics
The IntelliDry Wrinkle Free Fabrics cycle is designed to
dry wrinkle free cottons, synthetic fabrics, double knits
and permanent press fabrics automatically. At the end
of the cycle, the clothes are cooled for approximately
20 minutes to reduce wrinkling. If the load is not
removed from the dryer and Extended Tumble has
been selected, the cycle will advance to Extended
Tumble which provides additional unheated tumbling
time. (See Step 2).