Maytag Neptune MAH3000 Service Manual page 151

DOOR LOCK MECHANISM
The door lock mechanism is now locked
and unlocked via solenoids, resulting in
faster locking and unlocking of the washer
door. The mechanism is a non-repairable
assembly and must be replaced as an
assembly.
Emergency
Cord
Door
Lock/Unlock
Solenoid
Solenoid
Push-Rod
Locking
Lever
Removal
1. Disconnect power to the washer.
2. Remove the front panel, dispenser
bezel and lift the top cover to expose
the door lock assembly.
3. Remove the individual wire harnesses
from the assembly and the two mount-
ing screws.
4. Roll the top of the door lock assembly
forward and lift from the front shroud
assembly.
16010486 (16008373-05)
Revised 10/00
DOOR LOCK MECHANISM
Rotating
Cam
Cam
Mechanical
Support
Opener
Door Lock/
Unlock
Switch
Figure 5-7
©2001 Maytag Appliances Sales Company
An Emergency Access Cord is available
and is accessible by removing the dis-
penser bezel. The nylon cord is located
and pulled in a direction away from the
lock area. The cord is attached to the
mechanical opener. When the cord is
pulled, the opener will pivot and push the
locking lever into the open positon.
Door Open/Closed
Switch
Door Lock
Spring
Lamp Socket
& Lamp
Door Actuator
Figure 5-8
Section 5. Teardown & Wiring Information
5-3