Icandy Pear Instructions; Family Flexibility; Safety First; Components - iCandy pear Instruction Manual

iCandy pear instructions

Family Flexibility

You have invested into the most modern
versatile, flexible tandem stroller currently
available. Whether as a complete iCandy
pear tandem or iCandy apple/pear
converter, your pushchair has over twenty
options/combinations integrating reclining
seat units, lie flat carrycots and infant car
seats. Its modular design enables it to fold
to the size of a single pushchair and a
maximum individual component weight of
10kgs.

Safety First

Correct use and maintenance of your
pushchair is essential. Please take the time
to fully and carefully read this instruction
manual. If you require any further advice or
assistance when using your pushchair,
please contact the place of purchase.
1. Warning
With the exception
of the outer packaging carton, to
prevent injury from choking, remove
and immediately discard all other
protective packaging on this
product.
The iCandy pear is tested to comply with
BSEN 1888:2003 and is tested to ensure
compliance with the Furniture and
Furnishings (Fire) (Safety) Regulations.
iCandy pear
Follow these simple instructions
assemble your iCandy pear.
Box 1
a Rear wheels x 2
b Brake/rear axle
c Chassis
Box 2
d Lower seat unit
e Upper seat unit
f PIP subframe
g Front wheel support tube
h Bumper bar/carry handle lower
i Bumper bar/carry handle upper
j Seat/carrycot canopy (hood) lower
k Seat/carrycot canopy (hood) upper
l Front wheels x 2
m Raincover lower
n Raincover upper
Components not shown
Allen key, pump, bumper bar/carry handle
blanks x 2.
Components sold separately
Upper and lower carrycot fabrics, pair of
upper and lower car seat adaptors.
NOTE:
Lower components are colour coded
YELLOW and upper components are
colour coded BLUE.
Useful tip
New products are sometimes stiff to
engage and operate. We recommend ALL
adaptors and connector parts be lightly
lubricated with a silicone based furniture
polish. This is best achieved by spraying
polish onto a soft cloth and applying to
relevant parts.
to
1. Folded/hold together latch
To release the folding strap depress both
indicated clips simultaneously.
must be engaged before storage.
2. To open
To open the iCandy pear stand behind the
pushchair and, with both hands on the
pushbar, pull-up until the iCandy Pear
clicks into place.
2. Warning
Ensure that all the
locking devices are engaged before
use.
3, 4, 5 and 6. Fitting the front
wheels support tube
Slacken, remove and retain 4 x bolts
securing the noseplate using the allen key
provided (2 x short, 2 x long bolts). Note:
Retain lock nuts located in the lower plate.
Separate upper and lower noseplate
housings.
Place the front wheel support tube onto the
lower noseplate and align.
Align the upper noseplate and secure using
the original bolts and locknuts.
to engage all four bolts before fully
tightening to even tension using the
allen key. Ensure thread of bolts extends
through locknuts.
7. Fitting the brake bar/rear axle
assembly
Turn the iCandy pear upside down.
Position the brake bar / rear axle assembly
with the brake levers uppermost. Once the
rear axle assembly is secure to the main
chassis pull firmly on each side of the
combined brake bar / rear axle assembly to
check that the assembly on both sides is
This latch
securely locked into place.
8. To fit the rear wheels
Lift locking locating catch. Place the wheel
into the axle. Release locking locating
catch and wheel should lock into position.
Pull on wheel to ensure that it is securely
fitted. This process is repeated for the other
side. Inflate the tyres to 20-25 psi (1.5-2
bar). Useful tip; apply a smear of vaseline
to the wheel shaft to weatherise and ease
regularly
engagement.
pressures, inflated tyres make the
pushchair easier to push and steer.
9.Fitting the front wheels
Fit the front wheel assemblies onto the
support tube. Ensure the wheel assembly is
fully engaged (note on underside locking tab).
10. Using the brakes
To apply brake, press down gently on the
middle of the brake bar. Rocking the
pushchair assists engagement. To release
Take care
brake, place foot under brake bar and pull
upwards.
3. Warning
always apply the
brakes when the pushchair is
stationary.
11. Handle height adjustment
There are seven handle height positions. To
adjust, press the grey button and pull up
simultaneously to desired level.
check tyre