Page 2
The iCandy Peach is tested to comply with BSEN 1888:2003 & BSEN 1466:2004+ A1 2007 and is tested to ensure compliance with the Furniture and Furnishings (Fire) (Safety) Regulations.
Page 3
Handle height adjustment: Adjust handle height desired position (x4) depressing button and simultaneously pulling up. Release button ensuring both sides of the handle engage firmly. iCandy peach...
Page 4
& the handle is at its using zip. Pull up the hood frame hoop to lowest height). desired position. The folded chassis can be carried using the carry strap. (Check security of strap clips, before lifting). iCandy peach...
Page 5
‘jumps up’. This function can be operated in two separate single handed actions or simultaneously using both hands: When both sides are disengaged the iCandy peach seat unit can be removed from the chassis.
Page 6
To erect carrycot: (All c/cots) Access inside of carrycot by unzipping and removing apron. Take out the mattress. 8. Warning all carrycots must be used with the base in a horizontal attitude. iCandy peach...
Page 7
Lower carrycot: (Coded by yellow frame weight balance. legs).The lower carrycot can ONLY be fitted to the lower position on the ‘Blossom - double converter frame’ (coded yellow) facing forwards. See section 3.2 (attaching converting frames x 2). iCandy peach...
Page 8
The exterior of the carrycot, hood and 1. Use only on a firm, horizontal, level and c/cots). Depress the lower portion of the apron of the iCandy peach carrycot may be dry surface. grey outer ring on each side of the carrycot;...
Page 9
And the ‘saddles’ on the lower part of the frame are clamped around basket frame. To recline the seat unit: depress the centre grey buttons simultaneously and move to desired position. ( 2x positions). iCandy peach...
Page 10
Seat stop screws fitted). 15. Warning To avoid serious injury, always use the 5-point safety harness. All sections of the 5-point harness can be removed from the seat fabrics if required by rotating and releasing through the back/baseboards. iCandy peach...
Page 11
Double/twin lower position: (Coded position. yellow) Fit and press down into lower position of ‘Blossom’ adaptor frame ensuring it latches securely. note: The adaptor legs are grooved to prevent incorrect orientation when fitted to the ‘Blossom’ converter frame. iCandy peach...
Page 12
Section 5 1. iCandy Peach Configurations “Which mode am I in today?” Double pushchair options: The iCandy Peach is modular multi- (Toddler + newborn) (Toddler + toddler) functional design that enables you to adapt Chassis + Blossom + lower seat + your pushchair to your family requirements.
Page 14
General Instructions • original accessories manufacturer-approved parts only. • Use the iCandy peach for only one child Failure to do so may affect your when in the single configurations, and 2 warranty. d. Warning l. Warning children when double Do not allow your child never use the carrycot •...
Page 15
The warranty period for an iCandy peach second baby, or within 18 months, • NOTE In the interest of customer care...