Page 2
PEACH Welcome to the world of iCandy IMPORTANT: Keep these instructions for future reference. Read carefully. Your child’s safety may be affected if you do not follow these instructions. WARNING: It may be dangerous to leave your child unattended. If you have any problems or queries, please contact your local stockist or read the FAQ’s at www.icandyworld.com...
Page 4
The iCandy Peach is tested to comply with AS/NZS 2088: 2000, AS/NZS 2088: 2013 and Consumer Protection Notice No. 8 of 2007. IMPORTANT: This stroller has been modified specifically for the Australian market and includes a red brake operator, tether strap and a straight bumper bar which may differ from images shown.
Page 5
PEACH Section 1 - Chassis Contents: Chassis including: • front wheels & basket • rear wheels x 2 • axles x 2 Seat unit including: • Canopy • bumper bar • PVC raincover 1. To fit rear wheels to chassis: Depress axle button to engage as shown.
Page 6
PEACH 5. Brakes: Press down on pedal to engage. Lift up to release. 6. Front wheels: Can be selected in fixed or swivel position. (Swivel position required for folding chassis). 7. Handle height adjustment: Adjust handle height to desired position (x4) by depressing button and pulling up.
Page 7
The folded chassis can be carried using the carry strap. (Check security of strap clips, before lifting). 12. Tether strap: The iCandy Peach is fitted with a tether strap which should always remain fitted to the chassis and should be positioned to either side of the handle height adjustment button.
PEACH Section 2 - Seat Unit Important: The seat frame movement mechanism is supplied in the store / transport position. 1. To operate: Depress and hold both the outer frame release ring and the centre recline button simultaneously before rotating leg to centre position as shown.
Page 9
PEACH 4. Insert the hood removal / operation key into the zip puller.oc 5. Rotate the key into an upright position. 6. Pull upwards to disengage the zip fully and around the seat. 7. Attaching the hood: Engage the end of the zip into the foot of the zip.
Page 10
PEACH 9. Bumper bar: Attach the Bumper Bar with the inclined angle towards the foot end of seat unit. Ensure both locking- tabs fully engage. Check security by pulling bar upwards. Note: For Australian market the shape of the bumper bar will differ slightly. Operation and fitting is not affected.
Page 11
PEACH 13. To recline the seat unit: Depress the centre grey buttons simultaneously and rotate seat to desired position (3 recline positions in single mode). 14. To remove the seat unit: (Remove child before). Depress the lower portion of the grey outer ring on each side of the seat and lift the seat unit upwards.
PEACH Raincovers Securing your child using the 5 point safety harness: Push the left and right Fitting of raincovers: Fit raincover over connectors into the buckle housing & the hood / canopy area before fitting click together. Adjust the length of the over the footrest part of the frame.
Page 13
PEACH Section 3 (all bassinettes) Important: The bassinette attachment mechanism is supplied in the store / transport position. 1. To operate: Depress and hold both the outer frame release ring and the centre recline button simultaneously before rotating leg to centre position as shown.
Page 14
PEACH 2. Position and secure both ‘stay’ bars into baseboard clips. Replace mattress and apron as necessary. 3. Hood / canopy: Clip hood frame into sockets ensuring both locking tabs are fully engaged. Attach rear section of hood fabric using zip. Pull up the hood frame hoop to desired position.
Page 15
PEACH 5. Ensure both locking tabs fully engage. Check security by pulling handle upwards. 6. Removal of handle: Depress both locking tabs firmly inwards and remove from sockets. 7. Fitting the main Peach bassinette (rearward facing only): Orientate the bassinette so that it is facing rearwards and insert the arms into the left &...
fires, gas fires etc, in the vicinity of the bassinette. 4. The iCandy Peach bassinette is not a safe means of transport by car and should NEVER be used as such. Use an approved car safety seat for transport by car.
Page 17
PEACH Section 4 - Peach “Blossom” Contents: Box 1: As main pushchair (See Section 1) Box 2: Blossom converter frames (b). Main / upper seat stop screws (not shown) Lower seat unit (c). PVC rain cover (not shown). 1. Blossom Double / Twin Chassis assembly &...
Page 18
PEACH Blossom Converter 2. Attaching the Blossom converter frames x2: Insert the top sections of each converter frame into the chassis hub connectors. 3. Align the “saddles” on the lower parts of the frame with the basket frame. Push down firmly on the top and bottom sections of the converter frames to engage 4.
Page 19
PEACH Lower Seat Unit Important: The seat frame movement mechanism is supplied in the transport storage position. 6. To operate: Depress and hold both the outer frame release ring and the central release button simultaneously before rotating the leg to the central position Action on both sides of the seat before fitting to chassis.
Page 20
PEACH Upper / Main Seat Unit Assembly & operation is the same as the single stroller (see Section 2). Important: Ensure that the seat frame movement mechanism is taken out of the store/transport position prior to fitting (see page 8). 10.
Page 22
PEACH 2. Fitting the upper Peach Blossom bassinette (rearward facing only): Orientate the bassinette so that it is facing rearwards and insert the arms into the left & right sides of the upper receptors of the Blossom converter bars. Press down firmly to engage. Important: Always ensure your bassinettes are securely fitted before use.
Page 23
fires, gas fires etc, in the vicinity of the bassinette. 4. The iCandy Peach bassinette is not a safe means of transport by car and should NEVER be used as such. Use an approved car safety seat for transport by car.
Page 24
PEACH Section 6 - Single Stroller Car Seat Adaptors Maxi Cosi car seat adaptors (sold separately to fit the Maxi Cosi Mico, Mico Air Protect (shown) and Titan Air Protect infant carrier car seats) 1. Fitting the adaptors: (Marked L & R) Orientate and insert into the left and right sides of the chassis hub.
Page 25
PEACH 3. Press down firmly to ensure the car seat is firmly locked onto the adaptors. Once fitted, lift the car seat upwards to ensure it is correctly fitted. WARNING: Check that the car seat and adaptors are correctly fitted before use.
Page 26
PEACH Upper Adaptors Lower Adaptors Peach Blossom Maxi Cosi Mico car seat adaptors (sold separately to fit the Maxi Cosi Mico infant carrier car seat). 1 & 2 - Fitting the adaptors (marked left & right): Orientate and insert the upper and lower sets of car seat adaptors into the left &...
Page 27
PEACH 4. Fitting the upper Maxi Cosi car seat: Ensure upper adaptors are aligned with the fixing slots on the car seat. Press firmly down to engage. Once fitted, lift the car seat upwards to ensure it is correctly fitted. WARNING: Check that the car seat and adaptors are correctly fitted before use.
Page 28
PEACH Section 8 – iCandy Peach Configurations Single Stroller Options “Which mode am I in today?” The iCandy Peach is a versatile multi- functional design which enables you to adapt your stroller to your family’s requirements. Single stroller options: (newborn - 3yrs) 1.
PEACH Double “Blossom” Stroller Options Important: Your stroller can only be used in the configurations shown. 1. Chassis with main seat unit & lower Blossom seat unit. (Forward facing only) 2. Chassis with Blossom bassinette & main seat unit. (Forward facing only) 3.
Page 30
PEACH Double “Blossom” Stroller Options - continued Important: Your stroller can only be used in the configurations shown. 4. Chassis with lower “Blossom”seat unit & upper Maxi Cosi Mico infant car seat.(Seat unit forward facing, car seat rearward facing only) Important: When used with the lower “Blossom”...
PEACH Section 9 – Accessories Accessories available for the iCandy Peach: 1. Maxi Cosi Mico car seat adaptors. (Upper / Single) 2. Lower Maxi Cosi Mico car seat. (Colour coded yellow) 3. Superfleece Luxury Footmuff. 4. Main seat liner.
Page 32
PEACH 5. Lower “Blossom” seat liner. 6. Clamp for parasol & cup holder. 7. Cup holder...
Page 33
The iCandy Peach stroller is intended for children from birth up to 15kg’s (3 years approximately). This iCandy Peach chassis is suitable for use with the Peach main seat unit, Peach main bassinette and Maxi Cosi Mico, Mico Air Protect or Titan Air Protect.
Page 34
• Always use the tether strap to stop the stroller rolling away. • Take care when using the iCandy Peach stroller on stairs or escalators and never try to lift this stroller by the bumper bar.
Page 35
• The iCandy Peach bassinettes are not intended for use as an infant restraint device in a motor vehicle. • The iCandy main and Blossom bassinettes are only suitable for use in the iCandy Peach chassis and iCandy Peach Blossom converter bars respectively.
Regular light lubrication of moving parts will extend the life of your stroller and make opening and folding easier. • Do not leave the iCandy Peach Stroller in sunlight for prolonged periods as the colour of some fabrics may fade.
Page 37
PEACH Our promise to you Buying a pushchair for your baby is a special moment! iCandy never accept barriers or limitations, and are never satisfied until what we believe feels right. This is why we probe, push, pull, bite and crash our way through up to nine sets of international standards and outperform them all.
Page 38
Where products are replaced or repaired during the warranty period, this does not give automatic entitlement to extension of the warranty. The warranty will also apply if your iCandy product(s) are received as a gift. The warranty can be used by the owner of the product at any given time within the warranty period as long as the original proof of purchase can be presented.
Page 39
To activate your lifetime* warranty all you need to do is register your iCandy product(s) within 3 months of your child’s date of birth. In order to protect your lifetime* warrant y, don’t forget to arrange for your iCandy pushchair to be serviced between 18 - 24 months either through your original iCandy stockist or through our bespoke service packages**.
Page 40
PEACH The iCandy Peach is a quality product of British design and is distributed by Tobil & Co. Pty Ltd. For further technical information please contact your place of purchase, “E-mail: info@tobil.com.au” or visit www.icandyworld.com Imported into and distributed in Australia by: Tobil &...
Need help?
Do you have a question about the Peach 3 and is the answer not in the manual?
Questions and answers