“Hard Wired” Connection - Projecta IM300 Instructions Manual

"HARD WIRED" CONNECTION
When mounting the inverter in a vehicle, caravan, boat or cabin it may be preferable to use
longer DC battery cables than those supplied, so that the inverter can be placed in a more
convenient, cooler or more protected location.
If longer cables are required only use suitably insulated automotive battery cable according to the
following table (Note: B&S = AWG)
P/No. IM300
Up to 2m 8 B&S
(8mm2)
3m 8 B&S
(8mm2)
4m 6 B&S
(14mm2)
6m 3 B&S
(26mm2)
close to the battery.
P/No.
Fuse or Circuit
a trip facility.
protected from damage by corrugated conduit.
SWITCH
FUSE
10
IM600 IM1000
6 B&S 3 B&S
(14mm2) (26mm2)
3 B&S 2 B&S
(26mm2) (32mm2)
2 B&S 0 B&S
(32mm2) (49mm2)
0 B&S 00 B&S
(49mm2) (64mm2)
IM300 IM600
40AMP 100AMP 150AMP 250AMP
CORRUGATED CONDUIT
IM2000
2 B&S
(32mm2)
0 B&S
(49mm2)
00 B&S
(64mm2)
Not
Recommended
IM1000 IM2000
(or 2 x 150AMP
in parallel)