True Z5.0 Owner's Manual page 26

CHAPTER 4: PROGRAMMING & OPERATION
ADVANCED CONSOLE FUNCTIONS (continued):
Entering Diagnostics Mode:
• Remove the safety key
• Press and hold the + and – Speed keys until the console beeps. (approx. 3 seconds)
•
Re-insert the safety key.
Navigating Diagnostics Mode:
Using the up and down incline keys, users can scroll through the available options and the + and – keys to make changes.
Options include:
Time – The total number of hours the unit has been used.
Distance – The total distance the unit has run.
Units – Change between English Standard or Metric units of measurement.
Max Time – Sets the maximum program time.
Default Program Time – Sets the default time seen when entering a preset workout.
Reset Time – Sets the amount of time the unit can remain paused before resetting.
Sound – Enable or disable sound.
Default Weight – Adjust the default user weight (150lbs is pre-programmed).
Cooldown Time – Adjusts the length of the cooldown workout segment.
Top Backlight – Adjusts the brightness of the upper LCD display
Top Contrast – Adjusts the contrast of the upper LCD display.
Left LCD Backlight - Adjusts brightness of the lower left LCD display.
Right LCD Backlight – Adjusts brightness of the lower right LCD display.
Bottom Contrast - Adjusts the contrast of the lower LCD display.
HR Priority - Determines
Error Log – Contains a list of recent error codes to assist with troubleshooting.
Power cycle the unit to exit diagnostics mode.
Calibration Mode:
Calibration mode will conduct a basic test of the drive and incline systems to ensure that they are operating as intended.
Calibration may also be used by technicians to troubleshoot system errors.
Calibration Steps:
•
Remove safety key.
• Press and hold INCLINE UP & INCLINE DOWN.
• Re-insert the safety key and Press START to initiate
incline calibration.
•
CALIBRATION SUCCESSFUL or CALIBRATION
FAILED will be displayed.
• Remove the safety key to exit.
the order in which the unit reads heart rate data (contact or wireless)
Truefitness.com / 800.426.6570 / 636.272.7100
WARNING:
This process will take full control of the treadmill and can
be dangerous if caution is not taken.
•
Calibration can take up to two minutes to
complete.
• Do not stand on the treadmill during the
calibration procedure.
• Verify that the machine is free of all parts and tools.
•
Keep children and animals at a safe distance.
22