CHAPTER 2: ASSEMBLY INSTRUCTIONS
TREADMILL ASSEMBLY STEPS (continued):
STEP 6 Attach Safety Key:
a) Attach the safety key to the treadmill console
as shown.
b) Power on the treadmill at the base.
STEP 7 Calibration:
a) Run the treadmill calibration by following the
steps to the right.
WARNING:
This process will take full control of the unit
and can be dangerous if caution is not taken.
• Calibration can take up to two minutes to
complete.
• Do not stand on the treadmill during the
calibration procedure.
• Verify that the machine is free of all parts and
tools.
• Keep children and animals at a safe distance.
1. Remove the safety key.
2. Press and hold the up and down incline keys.
3. Replace the safety key (screen displays CALIBRATION).
4. Release the incline keys.
5. Press START.
6. Upon completion, CALIBRATION SUCCERSSFUL will be
displayed
7. Remove and replace the safety key to exit calibration mode.
8. Power cycle the unit before use.
Truefitness.com / 800.426.6570 / 636.272.7100
12