Table of Contents
Advertisement
Operations (Step 6 Operations with a Web Browser)
6-4 Settings with a Web Browser (1. Other Settings) (continued)
Items in the [Other] screen
Item
DHCP
IP Address
Subnet Mask
Default Gateway
Host Name
MAC Address
Program Version
Password
User Level
Operator Level
Administrator Level
Cache Control
FTP Server Function
Default Page
66
Sets whether to use DHCP.
Changes to the address allotted or approved by the network
administrator. (This can be changed only when DHCP is not used.)
Sets the value provided or approved by the network adminis-
trator as in the case of IP address. (This can be changed only
when DHCP is not used.)
Specifies the IP address for the default gateway. If the default
gateway is not to be used, enter "0.0.0.0" here. (This can be
changed only when DHCP is not used.)
Maximum 8 alphanumerical characters can be entered. Specify
the host name when access link is established by a host name
in a DNS (Domain Name System) environment. The host name
is displayed on the title bar of each sub window.
Leave this field blank if the host name is unknown or unnecessary.
Unique physical address of the unit. Cannot be changed.
The firmware version of VN-C10. Cannot be changed.
Passwords for accessing VN-C10. Maximum 8 characters.
Enter the user password.
Enter the operator password.
Enter the administrator password.
There are a few types of proxy server that caches CGI. With a
proxy server of this type, select [No Cache].
Select whether to enable or disable the FTP server function. With
this function enabled, user html pages, gif images, jpeg images,
etc. can be uploaded to VN-C10 using general FTP client software.
All uploaded files are stored directly under the [user] folder.
It can be accessed as in http://192.168.0.2/user/aaa.html with
a Web browser. ("192.168.0.2" denotes the VN-C10 IP address
when "aaa.html" stored in the FTP server is referred to.)
The FTP server name is fixed to [Administrator]. Use the
administrater password.
The VN-C10 top page is specified as the default page. If this func-
tion is enabled, the specified html file is used as the default page.
The default page is the one displayed when only IP address is speci-
fied.
Note
Even with this function enabled, if the specified html file
does not exist, the message, "404: Not found" is displayed
when http://192.168.0.2/ is accessed. Ensure that the
appropriate file name is entered.
Effect
Advertisement
Table of Contents
