Table of Contents
Advertisement
Preparations (Step 1 Connection and Installation)
1-1 Attaching a Lens
Attach a lens in the following procedure.
RESET
3
1
(a)
F
(b)
2.
IRIS
3.
1
3
2
4
4
2
1.
Before attaching a lens, check the mount
method of the lens.
VN-C10 is set for CS-mount at the factory. For
attaching a C-mount lens, loosen the back-
focus locking screw using a screwdriver and
turn the back-focus adjustment ring to change
the mount method accordingly with a finger
or a pointed tool like a screwdriver.
To attach a lens, observe the length shown
as (a). Do not use a lens with a length longer
than (a) as it may cause damage to the inter-
nal parts of the camera and proper lens at-
tachment would not be possible.
Lens
C-mount lens
CS-mount lens
2.
Attach the lens to the camera securely by turn-
ing it clockwise.
3.
In the case of a DC IRIS lens, connect the
lens cable to the socket while examining the
pin arrangement.
4-Pin Plug
Lens
Pin No.
1
2
3
4
Flange-back distance (b)
17.526mm
12.5mm
DC IRIS Lens
(Without a built-in EE amplifier)
Damping d
Damping e
Driving e
Driving d
Length (a)
10 mm max.
5.5 mm max.
13
Advertisement
Table of Contents
