NComputing N400 User Manual page 21

Accessing DHCP Settings in Windows Server 2008
From the DHCP Server:
1. Right-click Computer and select "Manage"
2. From the Computer Management window, open the Roles section and then the DHCP Server
section as seen below.
3. Open the DHCP Server Name in question, right-click on IPv4, and select "Set Predefined
Options". You are now ready to specify which DHCP tags you wish to add to your N-series
environment. Each of the potential tags and their functions are explained in the next section of
this guide.
Page 21 of 25
NComputing N-series User Manual rev11.09.12