The General Tab - NComputing N400 User Manual

2.2 The General Tab

The General Tab displays basic device information, is used to manage the connection between your
N-series device and vSpace Management Center servers, and allows you to update your device
firmware.

Device Info
– Here you can provide an identifying name for your device in the Name field,
and view the device's model, serial number, MAC address, and firmware version.
 vSpace Manage Center*
Enable auto-discovery
o
and connect to vSpace Management Center servers within its subnet.
Name / IP
o
vSpace Management Center server within your network.
Reset zone membership
o
membership information as the device joins a new vSpace Management Center server.
 Firmware
Username / Password
o
you've stored your updated N-series firmware on.
URL
o
– Enter the URL of the FTP server you've stored your updated N-series firmware
on.
Update
o
begin a firmware update.
*Note:
You can configure your DHCP server to automatically provide your N-series device(s) with
vSpace Management Center server information. This eliminates the need for you to manually configure
this setting for each device. Review section
more information.
Page 12 of 25
– Instructs your N-series device to automatically search for
– Here you can manually enter the IP or Fully Qualified Domain Name of a
– Enabling this feature will clear any previous zone
– Enter the username and password of the FTP server
– Once you've specified the above information, press the Update button to
4.2 DHCP Options for Automatic N-series Configuration
NComputing N-series User Manual rev11.09.12
for