Motorola MC2100 Series Quick Start Manual page 2

BATTERY REMOVAL COMMUNICATION
1
1. Press Power button to suspend the MC21XX. The
Install ActiveSync
PowerKey Action window appears.
Download ActiveSync ® 4.5 or higher from
2. Tap Safe Battery Swap.
3. Wait for the LED to turn red and then turn off.
http://www.microsoft.com and follow the instructions to
4. Using thumbs, push the two battery release latches up. install ActiveSync onto the host computer.
The battery ejects slightly from the device.
2
5. Remove the battery.
Communicate with Host
3
Create a Partnership
Motorola Solutions, Inc.
1301 E. Algonquin Rd. Schaumburg, IL 60196-1078, U.S.A.
Follow the on-screen ActiveSync instructions to establish a
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M
connection between the MC21XX and the host computer.
Logo are trademarks or registered trademarks of Motorola
Trademark Holdings, LLC and are used under license. All other
trademarks are the property of their respective owners.
© 2011 Motorola Solutions, Inc. All Rights Reserved.
72-155017-01 Rev. A — November 2011
For more information visit:
MC21XX SERIES QUICK START GUIDE
http://www.motorolasolutions.com/mc2100
ACCESSORIES
Screen Protector
®
Motorola recommends the use of a screen
protector to minimize wear and tear.
Screen protectors enhance the
usability and durability of
touch screen displays.
Benefits include:
• Protection from scratches and gouges
• Durable writing and touch surface with tactile feel
• Abrasion and chemical resistance
• Glare reduction
• Keeping the device's screen looking like new
• Quick and easy installation.
Not using a screen protector can affect your warranty coverage.
An initial screen protector is already applied to the MC21XX.
Contact your local account manager or Motorola Solutions, Inc. for
more information and purchasing details.
Single-slot USB/Charge Cradle
Four-slot Battery Charger
Mating Adapter
Four-slot Charge Only Cradle Holster
Four-slot Ethernet Cradle
HANDSTRAP INSTALLATION
Modem Adapter Cable USB ActiveSync/Charge Cable
1
1. Feed both loops through the two mounting holes.
Handstrap Lanyard
2. Slide the loops over the strap tab.
3. Press the tab down to secure.
4. Feed the ends of both belts through the handstrap bar.
5. Feed the end of the thick belt through the buckle.
Lanyard Installation
6. Feed the end of the thin belt through the buckle.
1. Feed the ends of both belts through the handstrap bar. 7. Feed one loop of the tether into the mini stylus slot.
2. Feed the end of the thick belt through the buckle. 8. Thread the other end of the tether through the loop.
3. Feed the end of the thin belt through the buckle. 9. Feed the end of the tether through the hole in the
4. Feed one loop of the tether into the mini stylus slot. handstrap bar.
10. Thread the mini stylus through the loop of the tether.
5. Thread the other end of the tether through the loop.
6. Feed the end of the tether through the hole in the
handstrap bar.
7. Thread the mini stylus through the
7 7
loop of the tether.
4 4
5 5
2 2
1 1 10
7
6
3
DATA CAPTURE OPTIONS
Scanning/Imaging
3
2
Laser/Linear Scanning
Imaging
8 8
5 5
4 4
9
6
ERGONOMIC CONSIDERATIONS
AVOID BENDING
AVOID REACHING
AVOID EXTREME
WRIST ANGLES
Low Scanning High Scanning
Alternate left
and right knees
Alternate left Use a ladder
and right hands
Taking breaks and task rotation recommended