Table of Contents
Advertisement
is mounted at the helm. See Figure E14. If equipped,
refer to the manu fact urer's literature included in the
owner's packet.
Figure E14: Helm Equipped w/GPS/Map
NOTICE
You should not rely on these displays as your
primary source of navigation. Rather, you
should use the GPS/Map as a backup to official
government charts and traditional methods of
navigation.
O. Instrument Maintenance
Electrical protection for instruments, stereo and
ignition circuitry is provided by a circuit breakers.
These breakers may be located either in the helm
circuit breaker panel located underneath the helm, the
battery switch panel or in the ignition switch panel.
Periodically, spray the ignition switch with a contact
cleaner. The ignition switch and all instruments,
controls, etc. should be protected from the weather
when not in use. Four Winns offers appropriate
weather covers for each model. Excessive exposure
can lead to gauge and ignition switch difficulties.
DO NOT use a product such as WD-40 as a
contact cleaner. Be sure to read the label be-
fore using any product.
Electronic gauges are affected by static electricity that
builds-up on the glass face. Periodic washing on the
gauge face with warm water and mild liquid detergent
will help eliminate the static electricity problem and
improve gauge accuracy.
Engines and Instrumentation - Section E
Owner's Manual Page 61
Advertisement
Table of Contents
